WATCHDOG_ENABLE_BIT=Val_0x0
Watchdog Control and Status Register
WATCHDOG_ENABLE_BIT | A read of this bit indicates the current enabled or disabled state of the watchdog. This bit resets to 0 on watchdog cold reset. 0 (Val_0x0): The watchdog is disabled. 1 (Val_0x1): The watchdog is enabled. |
WATCHDOG_SIGNAL_STATUS_BITS | A read of this bit field indicates the current state of the watchdog signals. A write to these bits has no effect. Bit [2] reflects the status of WDT_AP_IRQ1 and bit [1] reflects the status of WDT_AP_IRQ0. |